By Selecting Your Make
By Selecting Your Part
Marshall Engines Engine Assembly
- Marshall Engines are recognized as America's most reliable remanufactured engines.
- Marshall Engines leads the pack with the introduction of the world's first dyno tested and documented production remanufactured replacement engine.
- By adapting the QS-9000 quality standards created by Ford, Chrysler, & General Motors, Marshall Engines ensure top-notch products all the time.
- Since 1982, Marshall Engines has shipped over two hundred thousand remanufactured engines.
Marshall Engines Engine Assembly
If all that's left of your old engine is a mind-boggling crawl, don't be surprised. Its parts are probably long overdue for replacement. In fact, the engine itself may be asking for a replacement already. So do it a favor and give it a break. Replace it with the Marshall Engines Engine Assembly. Why pay for overhauling your old engine? Having its surfaces repolished and its parts replaced would easily cost you over five grand. You won't even be sure how long your old engine will last after an overhaul. At half that cost, you can get a totally-rebuilt engine which will last your car another lifetime. The Marshall Engines Engine Assembly has been repolished from the inside out. Each of its parts have also been replaced and upgraded to avoid known failures. And what's most important is its 3-years/100,000-miles warranty to back you up in case of problems. All these in one complete engine package - at half the cost of rebuilding your old engine. When this engine gets under your car's hood, you'd be surprised how long it has been since your car ran like brand-new. So what are you waiting for? Great deals on the Marshall Engines Engine Assembly await you right here in RacePages.
App: 2002-2006 Nissan Sentra
Brand: Marshall Engines
Part #: NS2500CT
Notes: MARSHALL ENGINES PREMIUM PLUS LONG BLOCK ENGINE, REMANUFACTURED -- DOHC, 16-valve, QR25DE engine family, with variable valve timing; Includes factory installed oil pan, timing cover, oil pump, pick-up tube and screen, and gasket set; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 10-13 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks.
Series: Premium Plus Long BlockCondition: RemanufacturedWarranty: Marshall Engine's 3-year or 100,000-mile warranty
Core: $350.00
| Make | Model | Year Range | Chassis/Engine |
| Nissan | Sentra | 2002 - 2006 | SE-R Spec V; All Engines; |
| Nissan | Sentra | 2002 - 2006 | SE-R; All Engines; |
| Nissan | Sentra | 2003 | Limited Edition; All Engines; |
| Nissan | Sentra | 2004 | S; 4Cyl 2.5L Gas, FI, Naturally Aspirated, QR25DE; |
| Nissan | Sentra | 2004 | SE-R Spec V; 4Cyl 2.5L Gas, FI, Naturally Aspirated, QR25DE; |
App: 1999-2004 Toyota Corolla
Brand: Marshall Engines
Part #: TY17941
Notes: MARSHALL ENGINES ENGINE ASSEMBLY, REMANUFACTURED -- DOHC, FWD, 16-valve, aluminum block and heads, with VVT; Supplied with front timing cover; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship.
Condition: RemanufacturedWarranty: Marshall Engine's Extra Protection Warranty
Core: $330.00
| Make | Model | Year Range | Chassis/Engine |
| Toyota | Corolla | 1999 - 2000 | VE; 4Cyl 1.8L Gas, FI, Naturally Aspirated, VIN "R", 1ZZFE; |
| Toyota | Corolla | 1999 - 2004 | CE; 4Cyl 1.8L Gas, FI, Naturally Aspirated, VIN "R", 1ZZFE; |
| Toyota | Corolla | 1999 - 2004 | LE; 4Cyl 1.8L Gas, FI, Naturally Aspirated, VIN "R", 1ZZFE; |
| Toyota | Corolla | 2001 - 2004 | S; 4Cyl 1.8L Gas, FI, Naturally Aspirated, VIN "R", 1ZZFE; |